PilotDECODER

Final Approach Calculator

Set the height above the runway, the distance to the runway, and the aiming point on the runway. The triangle redraws to scale, and each card shows its formula, its numbers, and how the approach compares with a standard 3° glide path.

Approach triangle drawn to scale Height, horizontal distance and slant distance to the aiming point. Runway Drawn to scale 0°
kilometers
kilometers
kilometers

The aiming point starts just past the runway numbers, at 250 feet (0.0762 kilometers). That figure estimates where the numbers end on a runway with threshold stripes: the stripes start 20 feet in and run 150 feet, then come a 20-foot gap and 60-foot numbers. Instrument runways also carry a painted aiming point marking about 1,000 feet past the threshold (Aeronautical Information Manual 2-3-3). Because of the flare, the wheels touch down beyond the aiming point (Airplane Flying Handbook).

When checked, the airplane holds a constant 3° glide path to the aiming point and the height follows the distance. The Airplane Flying Handbook (FAA-H-8083-3C) defines a stabilized approach as a constant-angle glide path to a point on the runway, and Aeronautical Information Manual 2-1-2 shows 3° as the on-glide-path angle for runway glide path lights.

Height is above the runway. For an altimeter reading, subtract the runway's elevation first.

Distance to the aiming point (b + d)

Slant distance to the aiming point (c)

Approach angle

Height on a 3° glide path at this distance

Difference from the 3° glide path

Difference = height (a) − height on a 3° glide path